Print
  1. Press Windows key  configure your computer installed with Windows 8 manually1+ x key on the keyboard and select “Run“, then type “services.msc“.
  2. Right click on “Wired AutoConfig“, and select “Properties“.
    configure your computer installed with Windows 8 manually3
  3. Click the “General” tab and select the following settings:
    1. Set “Startup type” to “Automatic“.
    2. Click “Start” to start the service.
    3. Click “Apply“.
    4. Click “OK”.

    configure your computer installed with Windows 8 manually4

  4. Press Windows key  configure your computer installed with Windows 8 manually1 + x key on the keyboard, and select “Control Panel“.
    configure your computer installed with Windows 8 manually5
  5. Click the “Network and Sharing Center“.
    configure your computer installed with Windows 8 manually6
  6. Click “Change adapter settings” on the left hand side of the screen.
    configure your computer installed with Windows 8 manually7
  7. Right click the “Local Area Connection” and select “Properties” for further configuration.
    configure your computer installed with Windows 8 manually8
  8. Click the “Networking” tab and select the following settings:
    1. Double Click “Internet Protocol Version 4 (TCP/IPv4)“.
    2. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically“.
    3. Click “OK“.

    configure your computer installed with Windows 8 manually9

  9. Click the “Authentication” tab and select the following settings:
    1. Check “Enable IEEE 802.1X authentication“.
    2. Choose “Microsoft: Protected EAP (PEAP)“.
    3. Uncheck “Fallback to unauthorized network access“.

    configure your computer installed with Windows 8 manually10

  10. Click “Settings” button. Uncheck all the settings as shown in the picture.
    configure your computer installed with Windows 8 manually11
  11. Choose “Secured Password (EAP-MSCHAP v2)” in “Select Authentication Method“, and then click “Configure…“. Uncheck it and click “OK“.
    configure your computer installed with Windows 8 manually12
  12. Click the “Authentication” tab and select the following settings:
    1. Click “Additional Settings…“.
    2. Check “Specify authentication mode” and choose “User authentication“.
    3. Uncheck “Enable single sign on for this network“.

    configure your computer installed with Windows 8 manually13

  13. Click “Save credentials” button and input your username and password.

    The password is case sensitive and the user name is in lowercase.
    If you are student, your user name contains only the first seven characters of your student ID, e.g. “ba12345”

    configure your computer installed with Windows 8 manually14

  14. Click “OK” and save your changes.
    configure your computer installed with Windows 8 manually15